ATJ7784 - Rear Axle Sleeve 45MM Long
- Nuffield 10/42 & 10/60 > 89157
- Nuffield 3/45, 4/65
- Leyland 344, 384, 253, 245, 255, 270, 262, 462, 272, 472, 282, 482
Leyland Golden Harvest 502, 602, 604, 702, 704, 802, 804
Note this part requires heating to fit (see workshop manual for instructions)
- Removing the old sleeve from the axle. We heat the sleeve with the gas bottle unit cherry red and it will drop off.
- Then allow the half to cool and clean the journal where the sleeve fits with emery cloth.
- Fitting the new sleeve you need to heat to a dark straw colour uniformly, a tip we use is to place the sleeve on steel plate and heat the plate with gas bottle on the underside (this should git a more uniform heat distribution all over the new sleeve).
- Stand the half shaft on the floor and drop the heated over the shaft, it should fall in to place and then cool and shrink to the shaft.
